Samsung OfficeServ 7400 Technical Manual page 56

OfficeServ 7400
TECHNICAL MANUAL
connected to GPLIM/GPLIMT/PLIM causes the total current draw per cabinet to exceed
6600mA. It does not provide power to DLI ports, MWSLI ports and other system interface
cards.
To force the GPLIM/GPLIMT to get power from the external OfficeServ 7150 PoE unit, you
must connect shunt pins 2 and 3 for each jumper J1, J2, J3 and J4 (EXT setting). Shunt pins 1
and 2 are connected at factory default (this setting causes the GPLIM/GPLIMT to get power
from the internal OS7400 power supply).
Set jumpers J1~J4 in the GPLIM/GPLIMT module.
Figure 3.41 Setting the Jumpers of the GPLIM/GPLIMT module
3.40
Home Page Home Page Table of Contents Table of Contents
INSTALLATION
PART 3 MAY 2010
J2
J1
J3
J4
J2
J1
J3
J4