Chapter 4 Ua5000 Broadband Service - Huawei MA5600 Manual

MSAN UA5000 Cases
{ max-distance<K> }:max-distance
{ max-distance<U><0,40> }:30
(config-if-epon-0/7)#
Change the distance to 30 km. If the distance between the ONT and OLT ranges from
20 km to 30 km, and the following two conditions are met, the ONT can register
normally:
1. The optical power is within the allowed range.
2. The distance between the furthest ONT and the nearest ONT is shorter than 20 km.
Suggestions and
Null
Summary:
Attachments:
Chapter 4
4.1 standard vlan cause the bad packet for multicast traffic
Title:
standard vlan cause the bad packet for multicast traffic
ID: SE0000356941
Update time:
2008-11-19 10:35:11
Author: Affandi Abdul Rahim
Product Integrated Acsess
Family:
Fault Type: UA5000 Broadband Service
Keywords:
multicast bad packet on cascadded IPMD frame
Digest: Vlan configuration
Phenomenon The IGMP mode are in proxy. When tested directly from metro-ethernet, the multicast packet are
Description:
okay but when cascade to other IPMD frame the board received bad packet from host IPMD fra
me. We assumed that all physical are okay.
Alarm Null.
Information:
Cause
The VLAN type in IPMD frame is standard. Usually all broadband services will use smart vlan.
Analysis: When execute "display multicast flow-statistic index 0" on the cascaded IPMD frame, the bandwi
dth sometimes are not the same as the host IPMD frame.
Handling
Change the host IPMD frame multicast vlan from standard to smart vlan. Now the multicast servi
Process: ce are the same between IPMD cascade frame and host frame.
Suggestions Null.
and summary:
Confidential Information of Huawei. No Spreading without Permission
UA5000 Broadband Service
Product:

Chapter 4 UA5000 Broadband Service

UA5000
61