Multicast Channels Can't Be Online At The Same Time In 5680T - Huawei MA5600 Manual

NGN Cases
connected to packet generator tool 2.Check the patchcord, the result is OK.
3.Try loopback ETHB Port, the result is OK.
4. in this case, ETHB is in the slot 0/17.
OLT (ETHB Port 1) --> Packet generator tool (GE port)--> OLT (GICF Port 1)
Alarm Informatio
Null
n:
Cause Analysi
The Board is in the isolate state
s:
Handling Proces
In this case, ETHB is in the slot 0/17.
s:
Using command,
get into interface ETHB
#undo isolate board 0/17
Suggestions and
Null
Summary:
3.2

256 multicast channels can't be online at the same time in 5680T

Title: 256 multicast channels can't be online at the same time in 5680T
ID: SE0000385483
Information
Troubleshooting Cases
Type :
Product Family: Optical Access
Fault Type: Multicast Service
Keywords: Enable MA5680T Multicast bandwidth
Permission
04Common Users Permission
Level:
Phenomenon
Configure MA5680T using 3 ONT (2xHG865 and 1xHG863).
Descriptio
When doing test, packet generator is used to generate IGMP packets as IGMP programs.
n:
The result is that only 128 multicast channels can be online at the same time.
MA5680T-->Packet generator -->HG865+HG863
Alarm Inform
Null
ation:
Cause Analy
Check configuration of multicast but it's OK .
sis:
The conclusion is there is not enough multicast bandwidth .
Handling Pr
MA5600T(config)#btv
ocess:
MA5600T(config-btv)#igmp bandwidthcAC
{ bandwidthswitch<E><enable,disable> }:disable
Command:
igmp bandwidthcAC disable
Are you sure to disable the bandwidth management?(y/n)[n]:y
MA5600T(config-btv)#quit
MA5600T(config)#
Suggestions
Null
and Summa
ry:
42
Confidential Information of Huawei. No Spreading without Permission
Chapter 3 GPON FTTx Cases
Quality Level:
C
Product: MA5680T