Table of Contents
Advertisement
NGN Cases
Phenomenon De
Q:
scription:
Different FE ports on the MA562xG are separated by default. How to implement the
interworking between different FE ports in one VLAN at layer 2?
Alarm Informatio
Null
n:
Cause Analysi
Null
s:
Handling Proces
A:
s:
Run the undo isolate port command to implement the interworking. For example, run the
following commands to cancel the separation between ports 0/1/1 and 0/1/2 so that ports
0/1/1 and 0/1/2 can communicate with each other:
MA5626(config)#undo isolate port 0/1/1
MA5626(config)#undo isolate port 0/1/2
3.7
The Interconnection Between the Switch of Company C and MA5600T Fails Because
the LACP Configuration of the Switch of Company C Is Incorrect
The Interconnection Between the Switch of Company C and MA5600T Fails
Title:
Because the LACP Configuration of the Switch of Company C Is Incorrect
ID: SE0000374363
Information
Troubleshooting Cases
Type :
Product Family: Optical Access
Fault Type: Equipment Interconnection
Keywords: Switch 6500 of company C, MA5600T, LACP
Permission
03Equipment Users Permission
Level:
Phenomenon De
In an oversea commercial office, the customer requests that Huawei MA5600T must be
scription:
connected upstream to the switch 6500 of company C in the lacp-static mode. After the
lacp-static mode is configured normally as follows, alarms are generated and services
fail.
MA5680T(config)#link-aggregation 0/17 0-1egress-ingress workmode lacp-static
MA5680T(config)#display link-aggregation all
---------------------------------------------------------------------
Master port
---------------------------------------------------------------------
0/17/0
---------------------------------------------------------------------
Total: 1 link-aggregation(s)
46
Confidential Information of Huawei. No Spreading without Permission
Link-aggregation mode Port NUM
egress-ingress
Chapter 3 GPON FTTx Cases
Quality Level:
C
Product: MA5600T Series
Work mode
2
lacp-static
Hide quick links:
Advertisement
Table of Contents
