Removing The Hood - Toro Groundsmaster 4100 Operator's Manual

2. Release the 2 latches at the forward lower
corners of the hood
Figure 73
1. Hood latch
2. Handle
3. Using the handles that are adjacent to the
latches, lift up and back the hood until the 2 prop
rods are seated in the 2 rod brackets
(Figure 73).
3. Prop rod
(Figure

Removing the Hood

1. Unlatch and raise the hood.
2. Remove the hairpin cotter securing the hood
pivot to the mounting brackets
g037226
1. Hairpin cotter
3. Slide the hood to the right side, lift the other
side, and pull it out of the brackets.
Note:
Reverse this procedure to install the hood.
g037227
73).
60
(Figure 74).
Figure 74
g031613