Toro Groundsmaster 4100 Operator's Manual page 42

Types of diesel particulate filter regeneration that require you to park the machine: (cont'd.)
Type of Regeneration
Recovery
Accessing the DPF Regeneration
Menus
Accessing the DPF Regeneration Menus
1. Access the Service menu, press the center
button to scroll down to the DPF R
option (Figure 39).
2. Press the right button to select the DPF
Regeneration entry
Time Since Last Regeneration
Access the DPF Regeneration menu, press the center
button to scroll down to the L
40).
Conditions that cause DPF regeneration
Occurs because the operator ignored requests for
a parked regeneration and continued operating the
machine, adding more soot to the DPF
EGENERATION
Figure 39
(Figure 39).
R field
AST EGEN
Use the L
AST
hours you have run the engine since the last reset,
parked, or recovery regeneration.
Technician Menu
g227667
Important:
may decide to perform a parked regeneration
before the soot load reaches 100%, provided
the engine has run more than 50 hours since
the last successful reset, parked, or recovery
regeneration.
Use the technician menu to view the current state of
engine regeneration control and view the reported
soot level.
(Figure
Access the DPF Regeneration menu, press the center
button to scroll down to the T
42
DPF description of operation
• When the reset-standby/parked or recovery
regeneration icon
displays in the InfoCenter, a recovery regeneration
is requested.
• A recovery regeneration requires up to 3 hours
to complete.
• You must have at least a 1/2 tank of fuel in the
machine.
• You must park the machine to perform a recovery
regeneration.
Refer to Parked or Recovery Regeneration (page
46).
R field to determine how many
EGEN
Figure 40
For operating convenience, you
ECHNICIAN
or #190
ADVISORY
g224693
option, and