There are jacking points located at the front and rear
of the machine.
•
On the frame at the inside of each front drive tire
•
At the center of the rear axle
Hauling the Machine
•
Remove the key and shut off the fuel (if equipped)
before storing or transporting the machine.
•
Use care when loading or unloading the machine
into a trailer or a truck.
•
Use full-width ramps for loading the machine into
a trailer or a truck.
•
Tie the machine down securely.
Locating the Tie-Down
Points
There are tie downs located at the front and rear sides
of the machine
(Figure
Note:
Use properly-rated DOT-approved straps in 4
corners to tie down the machine.
•
2 on the front of the operator's platform
•
Rear bumper
1. Rear tie-down point
71).
Figure 71
2. Front tie-down points
g203193
55