During Operation; During Operation Safety - Toro Groundsmaster 4100 Operator's Manual

2. Press the right button to change the auto idle
time between Off, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum Allowed
Mow Speed
1. In the Settings Menu, scroll down to Mow Speed
and press the right button.
2. Use the right button to increase the max full
mow speed (50%, 75%, or 100%).
3. Use the center button to decrease the max full
mow speed (50%, 75%, or 100%).
4. Press the left button to exit.
Setting the Maximum Allowed
Transport Speed
1. In the Settings Menu, scroll down to Transport
Speed and press the right button.
2. Use the right button to increase the max
transport speed (50%, 75%, or 100%).
3. Use the center button to decrease the max
transport speed (50%, 75%, or 100%).
4. Press the left button to exit.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.

During Operation

During Operation Safety

General Safety
•
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose jewelry.
•
Do not operate the machine while ill, tired, or
under the influence of alcohol or drugs.
•
Never carry passengers on the machine and keep
bystanders and pets away from the machine
during operation.
•
Operate the machine only in good visibility to avoid
holes or hidden hazards.
•
Before you start the engine, ensure that all drives
are in neutral, the parking brake is engaged, and
you are in the operating position.
•
Keep your hands and feet away from rotating
parts. Keep clear of the discharge opening at all
times.
•
Look behind and down before backing up to be
sure of a clear path.
•
Use care when approaching blind corners, shrubs,
trees, or other objects that may obscure your
vision.
•
Stop the blades whenever you are not mowing.
•
Stop the machine, remove the key, and wait for
all moving parts to stop before inspecting the
attachment after striking an object or if there is
an abnormal vibration in the machine. Make all
necessary repairs before resuming operation.
•
Slow down and use caution when making turns
and crossing roads and sidewalks with the
machine. Always yield the right-of-way.
•
Disengage the drive to the cutting unit, shut
off the engine, remove the key, and wait for all
moving parts to stop before adjusting the height of
cut (unless you can adjust it from the operating
position).
•
Never run an engine in an area where exhaust
gasses are enclosed.
•
Never leave a running machine unattended.
•
Before leaving the operating position (including
to empty the catchers or to unclog the chute), do
the following:
– Park the machine on level ground.
36