Using The Engine-Speed Switch; Adjusting The Mowing Speed - Toro Groundsmaster 4100 Operator's Manual

displays A
DVISORY
left button to exit to the home screen.
Figure 66
Note:
If the regeneration fails to complete, the
InfoCenter displays Advisory #184
Press the left button to exit to the home screen.
Figure 67
Using the Engine-Speed
Switch
The engine speed switch has 2 modes to change the
engine speed. By momentarily tapping the switch,
the engine speed can be increased or decreased in
100-rpm increments. By holding the switch down,
the engine automatically moves to H
depending on which side of the switch you press.
#183 (Figure 66). Press the
(Figure
or L
IGH OW IDLE
Adjusting the Mowing
Speed
Supervisor (Protected Menu)
This feature allows the supervisor to set the maximum
mowing speed in increments of 5% between 30 and
100%, at which the operator can mow (low range).
Refer to Setting the Maximum Allowed Mow Speed
(page 36) for the procedure to set the mow speed.
Operator
This feature allows the operator to adjust the
maximum mowing speed (low range), within the
supervisors pre-adjusted settings. When in the
InfoCenter splash or main screen, press the middle
button ( icon) to adjust the speed.
g224392
Note:
When switching between low and high ranges,
the settings will transfer based on the previous setting.
The settings are reset when the machine is turned off.
Note:
This feature may also be used in conjunction
66).
with cruise control.
g224393
,
50