Using The Infocenter Control - Toro Groundsmaster 4100 Operator's Manual

Using the InfoCenter
Control
The InfoCenter LCD display shows information
about your machine, such as the operating status
and various diagnostics
splash screen and a main information screen of the
InfoCenter. You can switch between the splash and
main information screens at any time by pressing any
InfoCenter button and then selecting the appropriate
directional arrow.
Figure 31
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can
use it to exit any menu that you are currently using.
•
Middle Button—use this button to scroll down
menus.
•
Right Button—use this button to open a menu
where a right arrow indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
(Figure 31). There is a
3. Middle button
4. Left button
InfoCenter Icon Description
SERVICE DUE
g020650
32
Indicates when scheduled service
should be performed
Engine rpm/status—indicates the
engine rpm
Hour meter
Info icon
Sets the maximum traction speed
Fast
Slow
Fan Reversal—indicates when the
fan is reversed
Fuel level
Stationary regeneration required
Air intake heater is active
Raise the left deck
Raise the center deck
Raise the right deck
Operator must sit in seat
Parking Brake Indicator—indicates
when the parking brake is on
Identifies the range as High
Neutral
Identifies the range as Low
Coolant Temperature-indicates the
engine coolant temperature in either
°C or °F
Temperature (hot)
Traction or Traction Pedal