Cab Controls - Toro Groundsmaster 4100 Operator's Manual

Cab Controls

1. Air-recirculation control
2. Fan control
3. Temperature control
4. Windshield-wiper switch
Air Recirculation Control
Sets the cab to either recirculate the air in the cabin or
to draw air into the cabin from outside
•
Set it to recirculate the air when using the air
conditioning.
•
Set it to draw air in when using the heater or fan.
Fan-Control Knob
Rotate the fan-control knob to regulate the speed of
the fan (Figure 7).
Temperature-Control-Knob
Rotate the temperature-control knob to regulate the
air temperature in the cab
Windshield-Wiper Switch
Use this switch to turn the wind shield wipers on or
off (Figure 7).
Air-Conditioning Switch
Use this switch to turn the air conditioning on or off
(Figure 7).
Power Outlet
Use this 15 A, 12 V DC power outlet to power
compatible devices (Figure
Lights Switch
Use this switch to turn the headlights and tail light on
or off (Figure 7).
Figure 7
5. Power outlet
6. Lights switch
7. Flashers switch
8. Air-conditioning switch
(Figure
(Figure 7).
7).
Flashers Switch
Use this switch to turn the flashers (hazard lights) on
or off (Figure
Windshield Latch
Lift up the latches to open the windshield
Press in the latch to lock the windshield to the O
position. Pull out and down on the latch to close and
secure the windshield.
g028431
1. Windshield latch
7).
Rear Window Latch
Lift up the latches to open the rear window. Press in
on the latch to lock the window in
out and down on the latch to close and secure the
window (Figure
Important:
the hood or damage may occur to the hood or rear
window.
19
7).
Figure 8
OPEN
8).
Close the rear window before opening
(Figure 8).
PEN
g196911
position. Pull