Toro Groundsmaster 4100 Operator's Manual page 18

1. Power-point port
Power-Point Port
Use the power-point port to power optional electrical
accessories (Figure 5).
Figure 5
2. Cruise-control switch
Seat Controls
Seat-Adjustment Lever
Move the seat-adjustment lever on the side of the
seat outward, slide the seat to the desired position,
and release the lever to lock the seat into position
(Figure 6).
g028454
1. Seat-adjustment lever
2. Armrest-adjustment knob
3. Weight-adjustment lever
Armrest-Adjustment Knob
Rotate the knob to adjust the armrest angle
Seat-Back-Adjustment Lever
Move the lever to adjust the seat-back angle
6).
Weight Gauge
The weight gauge indicates when the seat is adjusted
to the weight of the operator
height by positioning the suspension within the range
of the green region.
Weight-Adjustment Lever
Use this lever to adjust to the proper weight of the
operator (Figure
the air pressure and push down to decrease the air
pressure. The proper adjustment is correct when the
weight gauge is in the green region.
18
Figure 6
4. Weight gauge
5. Seat-back adjustment
lever
(Figure 6). Adjust the
6). Pull up the lever to increase
g037412
(Figure 6).
(Figure