Block Variables And Data Types For Fb502 - ABB ACS355 Series Quick Start Up Manual

Block variables and data types for FB502

Block variable
PZD3_OUT
PZD4_OUT
PZD5_OUT
PZD6_OUT
PZD7_OUT
PZD8_OUT
PZD9_OUT
PZD10_OUT
PZD2_SCALED
PZD3_SCALED
PZD4_SCALED
PZD5_SCALED
PZD6_SCALED
PZD7_SCALED
PZD8_SCALED
PZD9_SCALED
PZD10_SCALED
Drive
THIS_BLOCK_DB
Data type Comment
INT Write PZD3 value to the drive
INT Write PZD4 value to the drive
INT Write PZD5 value to the drive
INT Write PZD6 value to the drive
INT Write PZD7 value to the drive
INT Write PZD8 value to the drive
INT Write PZD9 value to the drive
INT Write PZD10 value to the drive
REAL Read PZD2 (actual speed / ACT) value from the drive, the default scaling
value corresponds to -20 000 to 20 000 → -100 to 100
REAL Read PZD3 value from the drive, the default scaling value is 1 = no
scaling
REAL Read PZD4 value from the drive, the default scaling value is 1 = no
Scaling
REAL Read PZD5 value from the drive, the default scaling value is 1 = no
Scaling
REAL Read PZD6 value from the drive, the default scaling value is 1 = no
Scaling
REAL Read PZD7 value from the drive, the default scaling value is 1 = no
Scaling
REAL Read PZD8 value from the drive, the default scaling value is 1 = no
Scaling
REAL Read PZD9 value from the drive, the default scaling value is 1 = no
Scaling
REAL Read PZD10 value from the drive, the default scaling value is 1 = no
scaling
DB_ANY Instance Data Block. The drive variable is used for identifying to which
drive FB502 ACS_DRIVE_PZD belongs.
The Instance Data Block of FB500 ABB_DRIVE_CONTROL_FB must
correspond to the variable FB502 ACS_DRIVE_PZD.
DB_ANY Instance data block of FB502.
Note: POKE (FC1) and POKE_BLK (FC2) are used in FB502 block logic
to exchange data between FB500 and FB502.