ABB ACS355 Series Quick Start Up Manual page 104

16h Parameter address impermissible
17h Illegal format
18h Number of values inconsistent
65h...FF Manufacturer-specific error area
65h Vendor-specific error
66h Request not supported
67h Communication error
6Eh Non-volatile error
6Fh Time-out error
78h PZD map failure
79h PZD memory failure
7Ah Multiple PZD map
82h Control word bit map
8Ch Set torque mode error
90h Illegal Request ID
96h Internal buffer
A0h Internal communication
Illegal value or value that is not supported for
the attribute, number of elements, parameter
number or sub-index, or a combination
Write request: Illegal format or format of
parameter data that is not supported.
Write request: Number of values of parameter
data does not match number of elements at the
parameter address.
-
Vendor-specific error
Request not supported
Request cannot be completed because of
communication error
Failure during write to non-volatile memory
Request aborted because of timeout
Parameter cannot be mapped to PZD (size
mismatch or non-existent)
Parameter cannot be mapped to PZD (out of
memory)
Parameter cannot be mapped to PZD (multiple
PZD write)
Cannot map Control word bit (parameter
933...937. e.g. double mapping of bits)
Cannot change mode to TORQUE (frequency
is used)
The request ID of the response is illegal
Buffer overflow
Communication error between module and
drive