Error Codes For Fb500 And Fc500 - ABB ACS355 Series Quick Start Up Manual

Error codes for FB500 and FC500

DP-V0 error table
Task cannot be executed, you can follow by error number.
Error no. Description
0 Illegal parameter number
1 Parameter value cannot be changed
2 Lower or upper limit violated
3 Erroneous subindex
4 No array
5 Incorrect data type
6 Setting not allowed (can only be reset)
7 Descriptive element cannot be changed
9 Descriptive data not available
11 No parameter changes rights
15 Text array not available
17 Task cannot be executed due to operating status
(e.g. parameter is currently read-only)
18 Other error
101 Vendor specific error
102 Request not supported
103 Request cannot be completed due to communication error
110 Failure during write to non-volatile memory
111 Request aborted due to time-out
120 Parameter cannot be mapped to PZD
(size mismatch or non-existent)
121 Parameter cannot be mapped to PZD (end of memory)
122 Parameter cannot be mapped to PZD (multiple PZD write)
130 Cannot map Control Word bit (parameter 933-937, e.g. double
mapping of bits)