Acs580 More Parameters Read From Drive To Plc (Optional); Acs580 More Parameters Written From Plc To Drive (Optional); Configuring Acs800 Drives; Starting Acs800 Drives For Profibus Dp - ABB ACS355 Series Quick Start Up Manual

27

ACS580 More parameters read from drive to PLC (optional)

Parameter Description
52.03 ...
Actual value or
52.12 parameter of drive
51.27 FBA PAR
REFRESH

ACS580 More parameters written from PLC to drive (optional)

Parameter Description
53.03 ...
Parameter of
53.12 drive
51.27 FBA PAR
REFRESH

Configuring ACS800 drives

Starting ACS800 drives for PROFIBUS DP

1. Power up the drive.
2. Enable the communication between the adapter module and the drive by setting parameter 98.02
COMM. MODULE LINK to FIELDBUS.
3. Set the RPBA-01 configuration parameters in group 51. At the minimum, set the required node
address in parameter 51.02.
4. With parameter 30.18 COMM FLT FUNC, select how the drive reacts to a fieldbus communication
break.
5. With parameter 30.19 MAIN REF DS T-OUT, define the time between communication break detection
and the selected action.
6. Define the process data transferred to and from the drive in the RPBA-01 configuration parameter
group 51.
Note: The Status Word, Actual Speed, Control Word and Speed Reference are configured as default.
7. Validate the settings made in parameter group 51 by setting parameter 51.27 FBA PAR REFRESH to
REFRESH.
8. Set the relevant drive control parameters to control the drive according to the application.
Setting Comment
GGii GG = parameter group, ii = parameter index
Example, 0107 = actual current; 3501 = motor est.
temp
REFRESH Updates fieldbus settings (groups 50 to 57)
Setting Comment
GGii GG = parameter group, ii = parameter index
Example, 2312 = acceleration time 1
REFRESH Updates fieldbus settings (groups 50 to 57)