Rsd Oil Types; Grease Lubrication - ABB LME620-AN Operating Instruction
Electrical linear actuator
Hide thumbs
Also See for LME620-AN:
- Operating instructions manual (40 pages) ,
- Operating instruction (32 pages) ,
- Service instruction (30 pages)
Table of Contents
Advertisement
26
LME / RSD10 / RSD20 / RSD50 / RSD100 (Contrac) ELECTRICAL LINEAR ACTUATOR | OI/LME/RSD10/100-EN REV. G
... 10 Maintenance
... Oil change
RSD oil types
Ambient temperature
−10 to 65 °C (15 to 150 °F)
−30 to 50 °C (−20 to 130 °F)
−1 to 85 °C (30 to 185 °F)
Filling volumes
RSD10 / RSD20
Mounting position
Minimum oil level l (gal)*
Max. stroke 100 mm (4 in)
Max. stroke 300 mm (11.8 in)
Minimum oil level below inspection plug when
thrust rod retracted mm (in)
RSD50
Mounting position
Minimum oil level l (gal)*
Max. stroke 120 mm (4.72 in)
Max. stroke 300 mm (11.8 in)
Minimum oil level below inspection plug when
thrust rod retracted mm (in)
RSD100
Mounting position
Minimum oil level l (gal)*
Max. stroke 150 mm (5.91 in)
Max. stroke 300 mm (11.8 in)
Minimum oil level below inspection plug when
thrust rod retracted mm (in)
*
US liquid gallon
Grease lubrication
Basic gearing (except DU female connectors)
Tribol GR 1350-2.5 PD, Castrol
All components must be sufficiently wetted.
Default oil filled with delivery
Castrol Alpha BMB 220 – DIN 51517
Mobil SHC 629 – DIN 51517 / ISO 12925-1
Mobil SHC 632 – DIN 51517 / ISO 12925-1
IMV 1
Approx. 3.8 (1.01)
Approx. 6.4 (1.69)
40 (1.57)
IMV 1
Approx. 7 (1.85)
Approx. 10 (2.65)
49 (1.93)
IMV 1
Approx. 11 (2.91)
Approx. 15 (3.96)
47 (1.85)
Recirculating ball screw
Tribol GR 1350-2.5 PD, Castrol
The recirculating ball screw must be completely
wetted after being actuated several times.
Oil types - DIN 51517
ESSO Spartan EP 220 – DIN 51517 / ISO 12925-1
BP Energol GR-XP 220 – DIN 51517
Shell Omala 220 – DIN 51517 / ISO 12925-1
Mobilgear 630 – DIN 51517 / ISO 12925-1
IMV 3
(Handwheel down)
Approx. 5.4 (1.43)
Approx. 3.8 (1.01)
Approx. 8.8 (2.33)
Approx. 6.4 (1.69)
0 (0)
Approx. 10 (2.65)
Approx. 12 (3.17)
150 (5.91)
[300 (11.81) stroke]
Approx. 18 (4.76)
Approx. 23 (6.08)
15 (0.059)
[150 (5.91) stroke]
130 (5.12)
[300 (11.81) stroke]
Motor mounting
ASONIC GLY 32
The motor bearings must be completely filled with
the lubricant.
Alternative oil
-
-
IMB 5
Approx. 3.8 (1.01)
Approx. 6.7 (1.77)
28 (1.10)
IMV 3
Approx. 7 (1.85)
Approx. 9.5 (2.51)
0 (0)
IMV 3
Approx. 13 (3.43)
Approx. 9.5 (2.51)
IMB 5
75 (2.95)
IMB 5
95 (3.74)
IMB 5
43 (1.69)
Advertisement
Table of Contents
