Tag Communication Status Setting Function For Cpu Stop Error - Mitsubishi Electric MELSEC Q Series User Manual

4
FUNCTION
4.3

Tag Communication Status Setting Function for CPU Stop Error

For each module, this function sets whether to stop or continue the Tag communication
when a stop error occurs in the CPU module mounted with the EtherNet/IP module.
Stop error occurred
(ERR.LED of CPU
module flashes.)
This function can be set in "Intelligent Function Module Detailed Settings" of GX Works2.
(
Table 4.7 Description of the "Intelligent Function Module Detailed Setting" window
Item
Error Time Output Mode
4
- 22 4.3 Tag Communication Status Setting Function for CPU Stop Error
Figure 4.21 Tag communication status setting function for CPU stop error
Section 5.5.1 Intelligent function module detailed setting)
Figure 4.22 "Intelligent Function Module Detailed Setting"
Stops Tag communication when a CPU stop error occurred. (default)
Clear The send/receive data before the communication stop are retained in the buffer memory of
the EtherNet/IP module.
Continues Tag communication when a CPU stop error occurred.
Hold
Send/receive data are updated in the buffer memory of the EtherNet/IP module.
Continue
or can be set!
Stop
Setting for a CPU stop error
Description