Dhcp Client Function - Mitsubishi Electric MELSEC Q Series User Manual

4
FUNCTION
4.5

DHCP Client Function

This function allows the EtherNet/IP module to acquire data such as an IP address from
the DHCP server.
(1) Setting
Remark
(2) Acquiring parameters
4
- 24 4.5 DHCP Client Function
EtherNet/IP module
Figure 4.24 DHCP Client Function
Select "Use" on the "Add Own Nic" window in Utility Package.
Figure 4.25 "Add Own Nic" window
The DHCP setting (Un\G16385) can be also used for the setting.
( Section 3.3.3 (1) DHCP setting (Un\G16385))
Writing the parameter setting in Utility Package turns on the Acquiring IP address
(X0D), and parameters can be obtained from the DHCP server.
Upon completion of acquisition, the Acquiring IP address (X0D) turns off.
DHCP server
Request
Response
(IP address, etc.)