Main" Tab (Module Status Display) - Mitsubishi Electric MELSEC Q Series User Manual

7
UTILITY PACKAGE (SW1DNC-EIPUTL-E)
7.6

"Main" Tab (Module Status Display)

The connection status of the modules is displayed.
Item
Start Monitoring
Stop Monitoring
[Monitoring]
button
Monitoring/Stop
Local
IP Address
[Network Status]
State
Tag Type
[Communication Total Count
Summary]
On Count
button
Detail View
7
- 21 7.6 "Main" Tab (Module Status Display)
Figure 7.11 "Main" tab
Table 7.9 "Main" tab items
/
The monitoring on the "Main" tab is started or stopped.
The monitoring status is displayed.
•"Monitoring ● (green)": Monitoring
•"Stop ● (red)": Monitoring stopped
The Nic Name and Node Name of the selected EtherNet/IP module are displayed.
The IP address is displayed.
The status of the modules is displayed.
•● (green) Own Nic: Normal module status
Remote Nic: Normal communications
•● (yellow) Abnormal module status (There is an own station error, but Tag communications can be
performed.)
Displayed only for Own Nic.
•● (red) Own Nic: Abnormal module status (There is an own station error and no Tag
communications can be performed.)
Remote Nic: Communication failure (PING test results are abnormal.)
Tag types (Producer/Consumer/UCMM/Class3) are displayed.
The total number of Tags registered in all modules is displayed for each Tag type.
Example: In the case of the module configuration shown below, 12 is displayed for Producer Tag
Type.
The numbers of registered Producer Tags are: four for the first module, three for the second
module, zero for the third module, and five for the fourth module.
Among the Total Count values shown above, the total number of Tags that are communicating
normally is displayed.
The details on On Count are displayed. (
Clicking is disabled when the Total Count values of Communication Summary are all 0.
Description
(1) "Detail View" window in this section)