3
SPECIFICATIONS
3
- 28
3.3 Buffer Memory
3.3.10 Output Area
POINT
(1) The addresses described in this section are applicable when the Common
Parameter is set by default. (
"Add Own Nic" window)
The addresses change depending on the Common Parameter setting.
Confirm the addresses in Utility Package or the buffer memory when
configuring the system.
(2) To receive data exceeding 16384 points, select "Extension Data Area" for
"Common Parameter" in the "Add Own Nic" window of Utility Package.
Set the auto refresh because the "Extension Data Area" data are not stored in
the buffer memory. (
Section 7.9.1 (1) Display and settings of the
Section 7.9.7 "Refresh Parameter" window)