Part Names - Mitsubishi Electric MELSEC Q Series User Manual

5
PRE-OPERATION PROCEDURES
5.3

Part Names

This section describes each part and its name of the EtherNet/IP module.
3)
No.
1) Indicator LED
10BASE-T/100BASE-TX interface connector
2)
(RJ45)
3) Battery
4) Battery connector pin
5) Serial number plate
5
- 9 5.3 Part Names
Figure 5.7 Part Names
Table 5.2 Part name and description
Name
Indicates the operating status of the EtherNet/IP module.
(
Connects the EtherNet/IP module to 10BASE-T/100BASE-TX.
The EtherNet/IP module automatically distinguishes between 100BASE-TX and
10BASE-T according to the target device.
Is for the error logging of the system.
Used to connect a lead wire of the battery.
Lead wire is disconnected from a connector when shipping to prevent the battery
from burning the power.
Indicates the serial number of the EtherNet/IP module.
4)
Description
(1) LED indication in this section)
QJ71EIP71
1)
RUN
ERR.
10BASE-T/
100BASE-TX
100
M
1), 2)
SD/
RD
QJ71EIP71
5)