Appendix 3 When Using Gx Developer; Appendix 3.1 Operation Of Gx Developer - Mitsubishi Electric MELSEC Q Series User Manual

APPENDICES

Appendix 3 When Using GX Developer

This section describes the operating procedure when using GX Developer.
(1) Applicable software version
Appendix 3.1
Configure the following settings when using GX Developer.
(1) Intelligent function module detailed setting
Type
Model name
Points
Start XY
Error time output mode
APPX
- 4 Appendix 3 When Using GX Developer

Appendix 3.1 Operation of GX Developer

For the applicable software version, refer to the following.
Section 2.1 (3) Applicable software packages
Operation of GX Developer
Double-click "PLC parameter" in the project window and click the "I/O assignment"
tab.
Figure APPX.2 "I/O assignment"
Table APPX.2 Setting items on the "I/O assignment" tab
Item
Select "Intelli.".
Enter the model name of the module.
Select "32points".
Enter the start I/O number of the EtherNet/IP module.
Clicking
Detailed setting
window.
Refer to the following and complete the setting.
Setting for a CPU stop error
Figure APPX.3 "Intelligent function module detailed setting"
Table APPX.3 Setting description in "Intelligent function module detailed setting"
Item
Clear: Stops Tag communication when a CPU stop error occurred. (default)
Hold: Continues Tag communication when a CPU stop error occurred.
Description
displays the "Intelligent function module detailed setting"
Description