1. Cylindrical roller
bearing
2. Differential
drive pinion
3. Press
1. Counter driven gear
2. Differential drive
pinion
3. Press
1. Cylindrical roller
bearing
2. Press
5) Remove cylindrical roller bearing by pressing differential drive
pinion, using hydraulic press.
REASSEMBLY
1) Press differential drive pinion to counter driven gear, using hy-
draulic press.
2) Coat inner surface of cylindrical roller bearing with A/T fluid.
3) Press cylindrical roller bearing, using special tools and hydrau-
lic press.
Special Tool
(A): 09951-16060
4) Tighten new lock nut for output shaft speed sensor, using spe-
cial tools.
Special Tool
(A): 09921-57810
(B): 09927-76050
Tightening Torque
(a): 125 N·m (12.5 kg-m, 90.5 lb-ft)
AUTOMATIC TRANSMISSION 7B1-129