7A2-24 MANUAL TRANSMISSION
1. Box (30 mm)
2. Output flange
1. Output flange
1. Circlip
1. Metal stick
2. No.1 bearing
3. Puller
1. No.2 bearing
2. Puller
12) Remove caulking of output shaft nut and loosen it with flange
fixed as shown.
Special Tool
(A): 09930-40113
13) Using special tool, remove output flange.
Special Tool
(A): 09913-60910
14) Remove output No.1 bearing circlip.
15) Using plastic hammer, drive out output shaft bearing.
Driven Gear
1) Drive out No.1 bearing by using puller, metal stick and press.
2) Drive out No.2 bearing by using puller and press.