Suzuki Baleno Manual page 871

CLUTCH COVER, CLUTCH DISC AND FLYWHEEL
1. Input shaft bearing
2. Flywheel
REMOVAL
1) Dismount transmission. Refer to "DISMOUNTING OF TRANS-
MISSION" in Section 7A.
2) Remove clutch cover, clutch disc and fly wheel. Refer to
"CLUTCH COVER, CLUTCH DISC AND FLY WHEEL RE-
MOVAL" in Section 7C.
3) When pulling out input shaft bearing from flywheel, use the fol-
lowing special tool.
Special Tool
(A): 09921-20210
(B): 09930-30104
CLUTCH (HYDRAULIC TYPE) 7C1-15
1. Release shaft seal
2. No.2 bush
3. Release shaft
4. No.1 bush
5. Release bearing
6. Clutch cover
7. Clutch disc
8. Clutch cover bolt
9. Flywheel