1. O/D off switch coupler
2. O/D off switch
1. Mode select switch
2. Disconnected select switch coupler
1. A/T fluid cooler pipe
O/D OFF SWITCH
INSPECTION
1) Remove console box.
2) Disconnect O/D off switch coupler.
3) Check continuity between O/D off switch terminals.
O/D off switch
Continuity
MODE SELECT SWITCH
INSPECTION
Check that continuity exists as shown in below by changing mode
select switch position.
Terminal No.
Switch position
Normal
Power
Snow
SOLENOID VALVES
REMOVAL
1) Disconnect negative cable from battery.
2) Drain engine coolant and A/T fluid.
3) Remove A/T fluid cooler pipe from A/T with hose connected.
4) Remove radiator with cooling fan, fan shroud, A/T fluid cooler
hoses and A/T fluid pipe.
5) Remove A/T side cover.
6) Disconnect solenoid couplers.
7) Remove solenoid valves.
NOTE:
Don't remove throttle pressure control solenoid valve.
Remove TCC solenoid valve, shift solenoid valve No.2
and shift solenoid valve No.1 in that order.
AUTOMATIC TRANSMISSION 7B1-73
ON
No continuity
Continuity
(1)
(2)
OFF
(3)