Panasonic LP-V Series Operation And Maintenance Manual page 85

3. Set the marking layout
Set the size and coordinate for the marking contents. Here describes the procedures to set the following layout.
Character Height
4 mm
Starting Coordinate
X : -10 mm
Y : 5 mm
1.
Press [CONDITION].
Then, press [CHARACTER].
2.
Set "4 mm" to [Character Height].
Set "4 mm" to [Character Width].
Set "-10 mm" to [X Position].
Set "5 mm" to [Y Position].
Set "5 mm" to [Char. Interval] (Character Interval).
3.
Press [IMAGE] to check the marking layout.
Character Interval 5 mm
ABCD
Character Width 4 mm
ME-LP400V-OP-6
85