Panasonic LP-V Series Operation And Maintenance Manual page 204

Description
4 New Line (Only for 2D side of composite code / GS1 DataMatrix code) :
When the code data of 2D code or 2D side of the composite code is set in the several strings, set whether the
linefeed is applied to the human readable text or not.
Selects "Do" for marking Human Readable Text per 2D code data with line feed. If marking one character string
without line feed, select "Don't".
5 Line Interval :
When "line feed" is set ON, specifies the line interval of Human Readable Text.
Setting Range
6 Font :
Select font type of Human Readable Text from the registered font.
7 Laser Power Correction :
Scan Speed Correction :
Laser Pulse Cycle Correction (Only LP-V series) :
Correction of each human readable characters for the laser power / scan speed / laser pulse cycle set at laser
setting.
Setting Range of Laser Power Correction
Setting Range of Scan Speed Correction
Setting Range of Laser Pulse Cycle Correction
Reference
• If the value of "Laser power correction" × "laser power" is equal to or larger than 100, the setting will be "100".
• Marking is not available when the laser power correction value is "0".
• If the corrected value exceeds the setting limit, the nearest upper or lower limit value of the each item is set.
8 AUTO :
Pressing AUTO button automatically aligns the Human Readable Text at its optimal position.
Reference
• When "X" is set to the narrow element width, the marking characters are automatically aligned at its center position on
the center of the code 3X distance from bottom of the code (for 2D side of composite codes from the top), character
width: 5X, character height 6X, character interval 4.5X.
9 CENTERING:
Pressing CENTERING button aligns the Human Readable Text to the center of the code.
10 SET:
Sets and conform the setting condition of Human Readable Text.
11 CANCEL:
Cancel the setting condition and close the Human Readable Text Setting screen.
204
0.000 to 90.000 mm (LP-V10)
0.000 to 110.000 mm (LP-430 / LP-420 / LP-410)
0.000 to 160.000 mm (LP-435 / LP-425 / LP-V15)
0.000 to 55.000 mm (LP-431 / LP-421 / LP-411 / LP-W052)
ME-LP400V-OP-6
0 to 200%
5 to 500%
50 to 200%