Panasonic LP-V Series Operation And Maintenance Manual page 193

⿎ Condition setting of GS1 DataBar
1
2
3
4
11
Description
1 Type :
Specifies the type of GS1 DataBar.
• When the code type is GS1 DataBar, Standard & Truncated, Stacked, or Stacked Omnidirectional are
available.
• When the code type is GS1 DataBar Limited, only Limited is available.
• When the code type is GS1 DataBar Expanded, Expanded or Expanded Stacked are available.
Reference
• When GS1 DataBar Limited is used, select how to specify the guard pattern width in "Bar Code Setting" (P.257) in
Environment setting.
2 Module width (W) :
Specifies the minimum width of bar or space. Set the larger value than "Line Width" set in laser setting screen.
Setting Range 0.050 to 1.000 mm
3 Bar Code Height *1 :
Lower Bar Code Height *2 :
One Bar Code Height *3 :
Specifies the height of bar code / lower bar code / respective tiers on a multi-tiered bar code.
GS1 DataBar Standard&Truncated, GS1 DataBar Limited, or GS1 DataBar Expanded only
GS1 DataBar Stacked only
GS1 DataBar Expanded Stacked or GS1 DataBar Stacked Omnidirectional only
1.000 to 90.000 mm
1.000 to 110.000 mm
Setting Range
1.000 to 160.000 mm
1.000 to 55.000 mm
4 Invert :
To invert the marking lines of the code symbol, check the box.
With inversion setting bars are not marked, but spaces in the code symbol are marked by laser.
6
9
10
5
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
ME-LP400V-OP-6
7
8
193