Mark To Flying Object - Panasonic LP-V Series Operation And Maintenance Manual

3-3-8 Mark to Flying Object

Sample
Sensor
The following shows the procedure for marking to flying object.
1. Input character and set the marking conditions.
Refer to "3-2-3 Set the marking data" (P.83).
2. Set the conditions of the on-the-fly marking.
The detail is described in "1. Set the conditions of the on-the-fly marking." (P.118).
3. Set the status of the laser marker into ready for receiving trigger.
The detail is described in "2. Set the status of the laser marker into ready for receiving for trigger." (P.120).
Reference
• For details on marking on moving object, refer to "4-12-2 Marking to Flying Object" (P.220).
ME-LP400V-OP-6
117