Panasonic LP-V Series Operation And Maintenance Manual page 210

⿎ Arc
Description
1 Start Point X/Y :
End Point X/Y :
Specifies the starting / ending point of arc.
Setting Range
2 Radius:
Inputs the radius of arc.
Setting Range
3 Direction:
For the arc in counterclockwise direction, select [CCW] and in clockwise direction, select [CW].
4 Open Ang. (Open Angle):
Select the open angle of the arc from "under" or "over" 180 degree.
• Open Angle: under 180 degree
Open Angle
Radius
Radius
End Point
(X,Y)
210
1
3
-45.000 to +45.000 mm
-55.000 to +55.000 mm
-80.000 to +80.000 mm
-27.500 to +27.500 mm
0.010 to 300.000 mm
Counterclockwise
Start Point
(X,Y)
Clockwise
Radius
Radius
Open Angle
ME-LP400V-OP-6
2
4
(LP-V10)
(LP-430 / LP-420 / LP-410)
(LP-435 / LP-425 / LP-V15)
(LP-431 / LP-421 / LP-411 / LP-W052)
• Open Angle: 180 degree or more
Open Angle
Clockwise
Radius
Radius
Radius
Start Point
(X,Y)
End Point
(X,Y)
Radius
Open Angle
Counterclockwise