Rotation Of Lp-400 Standard Head Scanner - Panasonic LP-V Series Operation And Maintenance Manual

2-1-3 Rotation of LP-400 Standard Head Scanner

For the standard head models of LP-400 series (LP-430U / LP-420S9U / LP-410U / LP-431U / LP-420S9U / LP-411U / LP-
435U / LP-425S9U), the angle of the head scanner unit can be set freely.
* This function is specific to the standard head model of LP-400 series. It is not equipped in the tower head model.
⿎ Rotation Method
• The head scanner can be rotated up to 350 degrees by loosening the hexagon socket head cap screw (M4).
After rotating the scanner unit, fix it tightly.
• The tightening torque shall be 1.5N·m or less.
WARNING
⿎ Center of Rotation
Dead Angle:
Approx. 10°
Approx. 60°
End Standard
for Base
64
Loosen
Approx. 200 degree
• Never use the laser marker with the setscrew for scanner angle loosened.
Failure to do so could rotate the head during the operation and cause laser
emission to the dangerous direction.
Approx. 20°
51.2 28
130
14.2
115.5
158.4
15.8
29 129
ME-LP400V-OP-6
M4 Hexagon Wrench
Approx. 150 degree
Center of
Rotation Axis
31.8 129.2
15.8
31.8
107.2
[Unit: mm]
29.2