Panasonic LP-V Series Operation And Maintenance Manual page 250

⿎ Restore
Restore (Overwrite) the file data (setting files, logo files, font files and environment settings) in the laser marker with the
externally saved backup data by the following procedures.
1.
Insert the USB media with the back up data into the USB
port of the controller.
The following folder structure of backup data can be read.
Reference
• Store "SUNX_BKUP" folder in the root directory of the USB media.
2.
Press [RESTORE]. and the folders in "SUNX_BKUP"
directory are displayed.
Select the folder in which the importing backup data is
stored and press [CONFIRM].
3.
Confirm screen is displayed. To execute restore press [OK].
4.
Restore is conducted.
Reference
• When the restore is executed, the following files are not deleted and remains in the laser marker.
• Marking files saved in the file numbers in which no marking files are existed in the backup data
• Logo files whose file name (.vec or .dxf) is not existed in the backup data
• The following parameters are not restored at the importing of the backup data. For them the laser marker keeps the
original setting.
• Present time of internal clock (Environment setting)
• Console setting (Environment setting)
• Current value of counter function
• Display language
• Error log
• System information
• If Ethernet is used, check the IP address, etc after the importing of the backup data. When the backup data is imported
to the laser marker, communication parameter settings are overwritten with the backup data.
• In the case of restoring backup data from the other model, setting value beyond the setting range indicated in red. In
such case, laser marker operates at the nearest upper or lower limit, or an error of the setting warning is occurred at the
marking. Correct those value within the setting range according to the model.
• In case of restoring the backup file in the new version controller to the old version controller, settings of new functions
are not available (restored).
• It is impossible to restore the backup file including DXF file to the laser marker whose controller version is 2.20 or
previous version.
• It is possible to import an individual file from the backup data to the laser marker. Refer to "Register to Inside" (P.247).
250
ME-LP400V-OP-6
USB media
"SUNX_BKUP" folder
Folder (can be renamed)
"BACKUP" folder
SYSTEM.LOG
BKUP. INI