4-6-2 Guide laser
The red LD guide laser traces the marking content, marking image of the work, and marking field set previously.
The position of the marking object is easy to be adjusted using the guide laser function.
Reference
• Guide laser cannot trace the marking characters for the moving object. If the marking for moving object is set, the guide
laser operates same as the static marking.
• Guide laser is enabled when "LASER STOP" is input from the terminal block.
• The setting of guide laser scan speed is common in all files.
1.
Press [INDICATE].
2.
Select the indication mode and press [START].
• Marking area
• Marking character
The scan speed (tracing speed) of guide laser can be changed by
pressing the entry field of "Scan Speed".
Marking area indication
3.
The guide laser is stopped by pressing [STOP].
The guide indication is stopped automatically after 1 minute.
Marking character indication
ME-LP400V-OP-6
137