Connecting Laser Marker; Connecting Head, Controller, Terminal Block - Panasonic LP-V Series Operation And Maintenance Manual

2-2 Connecting Laser Marker

CAUTION

2-2-1 Connecting Head, Controller, Terminal Block

⿎ LP-400 Series
To SIGNAL
To POWER
Head Control Cable (5 m)
(Min. bending radius: 100 mm)
⿎ LP-V Series and LP-W Series
Fiber Cable (4.5 m)
(Min. bending radius: 60 mm)
*This cable can not be detached.
Head Control Cable (5 m)
(Min. bending radius: 100 mm)
72
• Prior to wiring and/or cable connecting work, ensure that all the power switches
are turned off. Otherwise, electrical shock may result.
Head
To TERMINAL
Head
To POWER
To SIGNAL
Head Power Cable (5 m)
(Min. bending radius: 100 mm)
To SIGNAL
Terminal Block
Head Power Cable (5 m)
(Min. bending radius: 100 mm)
To SIGNAL
Terminal Block
ME-LP400V-OP-6
Controller
To POWER
Controller
To POWER
To TERMINAL