Figure 3.14 Connection Of Feeder Cable (Detail B) - Samsung RRH-2WB Installation Manual

CHAPTER 3. Connecting Cables
4) Attach the heat shrink tube (jelly type, black) for finishing to the other end of the 1/2 in. jumper ass'y
connected to the RRH-2WB's RF port, and connect the N-type male connector to the sector antenna's port.
5) After connecting the connector, finish the connection with a heat shrink tube (jelly type, black).
3-24
Sector Antenna (4T4R)
Antenna Connector (N Type-Female)
N Type-Male Connector For 1/2 in. Feeder Line
Heat Shrink Tube (Jelly Type, Black)
1/2 in. Feeder Line
Heat Shrink Tube (Jelly Type, Black)
1/2 in. Feeder Line
Heat Shrink Tube (Jelly Type, Black)

Figure 3.14 Connection of Feeder Cable (Detail B)

Detail 'B'
© SAMSUNG Electronics Co., Ltd.