Table of Contents
Advertisement
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
Warning for Laser Beam Running through Optical Cables
In the system, the laser beam emitting light runs through the optical cable.
The exposure of the laser beam on worker's eye may cause serious injury so that
it should be handled with care.
Connecting the Optic Cable
Before connecting the optical cable, check if the cutting section of the connector
core is soiled. Be careful to keep the cutting section away from dust or foreign
material. If the cable is soiled with foreign material, do not blow to remove them.
Make sure to clean the connector in accordance with the cleaning directions for
the optic cable. Refer the 'ANNEX D'.
© SAMSUNG Electronics Co., Ltd.
3-19
Advertisement
Table of Contents
