1.5 Installation Tools
The basic tools for installation are listed in the table below. The additional tools required
for each site need to identified and prepared during a site survey before starting installation.
No.
1
Torque driver set
2
Torque wrench set
3
Nut driver set
4
Hacksaw Frame/Blade
5
Level/Plumb bobs
6
Heating gun
7
Solder
8
Power extension cable
9
Tape measure
10
Cable cutter
11
Silicon gun/Silicon
12
Spanner
Precautions when Using the Installation Tools
The required installation tools may vary depending on the conditions at the site.
In addition to the basic tools, a protractor, compass, GPS receiver, ladder, safety
equipment, cleaning tools etc. should also be prepared in consideration of the site
conditions.
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
Table 1.1 Basic Installation Tools
Name
- No.0~+ No.3 (M2.6~M6 '+' Driver)
- 1.0~60 kgf.cm (0.07~4.34 lbf·ft)
- M6~M12
- 10~30 kgf.cm (0.72~2.17 lbf·ft), 100~500 kgf.cm
(7.23~36.15 lbf·ft), Replaceable head
6~10 mm (0.24~0.39 in.)
Normal/HIS
Normal/500 g (1.10 lb)
50~300°C (122~572°F)
30~130 W
30 m
5 m/50 m (196.85 in./1.97 in.)
325 mm (12.80 in.)
Normal/Gray & Colorless
19 mm, 24 mm, 36 mm (0.75 in. 0.94 in. 1.42 in.)
Specification
1-9