Power Connector Assembly - Samsung RRH-2WB Installation Manual

C.5 Power Connector Assembly
The procedure for assembling the power connector (Amphenol, CJE-AL06M25U15-2S) is
as follows.
1) Cut the power cable to the length of installing section.
2) Strip the external sheath of the cable for the connector about 35 mm (1.38 in.) from the end and sheath
of internal core conductor about 10 mm (0.39 in.).
3) Solder the connector pin after inserting it into the stripped core conductor. After soldering, check if the
connector pin is firmly fixed.
4) Insert the connector parts into the cable with the connector pin as below.
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
10 mm
(0.39 in.)
35 mm
(1.38 in.)
Figure C.13 Power Connector Assembly (1)
C-15