Table F.1 Standard Torque Value For Tightening Bolts - Samsung RRH-2WB Installation Manual

ANNEX F.
When you tighten the bolt, refer to the standard torque value below to prevent the
equipment and bolt from damage and secure by tightening. When the torque value for each
connection part is defined already, refer to the defined value.
Bolt Spec.
M3
M4
M5
M6
M8
M10
M12
Checking Standard Torque Value
Torque value can be different, defending on the material, characteristic and
specification of the equipment and fixing material. Make sure to check the proper
torque value for each specification of the equipment and fixing material.
© SAMSUNG Electronics Co., Ltd.
Standard Torque

Table F.1 Standard Torque Value for Tightening Bolts

Torque Value (kgf.cm)
4.08~6.12
9.52~14.28
20.0~30.0
33.28~49.92
82.4~123.6
166.4~249.6
292.0~438.0
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual
Torque Value (lbf.ft)
12.03~18.05
21.11~31.67
0.29~0.44
0.69~1.03
1.45~2.17
2.41~3.61
5.96~8.94
F-1