Table of Contents
Advertisement
Fixing Materials for outdoor
Stud bolts, Hex. nuts, spring washers, and plane washers that are used to fix the
pole should be made of stainless materials (STS 304). If not, the joint parts may
oxidize or gather rust.
After Installing
Cover the cable holes drilled on the floor with a solid cover.
Remove any debris produced during the work and clean up the installation site.
Warning for Laser Beam Running through Optical Cables
In the system, the laser beam emitting light runs through the optical cable.
The exposure of the laser beam on worker's eye may cause serious injury so that
it should be handled with care.
Cautions while Cleaning the Rack
Make sure that worker does not damage installed cables while cleaning the rack.
Cautions while Cleaning Power Supply
While cleaning the power supply device, take caution that the device does not
come in contact with alien bodies that may cause power failure.
Management of Unused Ports
Cover the unused ports (conduit, cable gland, etc.) with waterproof cap (sealing
cap) to prevent infiltration of foreign material such as dust, moisture, or bug.
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
1-7
Advertisement
Table of Contents
