Marking And Drilling; Figure 2.3 Rrh-2Wb Marking - Samsung RRH-2WB Installation Manual

2.2.2 Marking and Drilling

System marking helps install the system in a precise location by marking the locations of
the system, anchor bolts, and cable racks on the floors, walls, and ceilings. When marking
is completed, drill holes for anchor bolts.
1) On the location of the system installation, mark the positions of the equipment and
anchor bolts as shown in the Figure below.
2) Drill holes to insert the anchor bolts and cover the holes with acetate tape before
installing the system.
Mounting Method
Wall mount
Unit: mm (in.)
Anchor Bolt Hole
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual/Ver.2.0
Table 2.2 Anchor Bolt Drill Bits and Hole Depth
Anchor Bolt
M6
390 (15.35)
370 (14.57)
168 (6.61)
[Rear View]

Figure 2.3 RRH-2WB Marking

Drill Bits
10 mm (0.39 in.)
Hole Depth
33 mm (1.3 in.)
2-3