Table of Contents
Advertisement
INTRODUCTION
Purpose
This manual describes how to install the RRH-2WB of TD-LTE Flexible system (SLS-
BD104) which is a multi-mode BS of Mobile WiMAX/TD-LTE, and how to connect cables.
Document Content and Organization
This document consists of 3 Chapters, 6 Annex and Abbreviation, which are summarized as
follows:
CHAPTER 1. Before Installation
This chapter introduces the safety rules that must be understood for installing the RRH-
2WB and describes the block diagram of the RRH-2WB.
CHAPTER 2. Installing System
This chapter describes the procedures to install the RRH-2WB.
CHAPTER 3. Connecting Cables
This chapter describes the procedures to connect the cables to the RRH-2WB installed.
ANNEX A. Sector Antenna Installation
This annex describes cautions and installation procedure of the sector antenna.
ANNEX B. Installing Feeder Cable
This annex describes cautions and allowed radius of curvature when installing feeder line.
ANNEX C. Connector Assembly
This annex describes the procedure of assembling connector.
ANNEX D. Cleaning Optic Connector
This annex describes the procedure of cleaning the optic connector and cleaning tool.
© SAMSUNG Electronics Co., Ltd.
Mobile WiMAX/TD-LTE RRH-2WB Installation Manual
I
Advertisement
Table of Contents
