To Record, Listen To Or Erase A Vrs Message If You Call In Using Disa; To Listen To The General Message; To Record, Listen To Or Erase The General Message - NEC UNIVERGE SV9100 Features And Specifications

To record, listen to or erase a VRS message if you call in using DISA:

1. Place call to the system.
 You hear dial tone.
2. After the system answers, dial the DISA password (normally 000000).
 You hear dial tone.
3. Dial 716 and the VRS password.
4. Dial the function you want.
7 = ecord
R
5 = isten
L
3 = rase
E
5. Dial the message number (01~100), record the message and press
 If you dialed 7 to record, you can dial
 If you dialed 5 to listen, you can dial 5 and the message number to hear it again or if
you want to Record, listen to or erase another message, go back to step 4.
General Message

To listen to the General Message:

Multiline Terminal Only
Your Message Waiting LED flashes when there is a new General Message. A voice
message periodically reminds you.
1. Do not lift the handset or press Speaker.
2. Dial 4 ( eneral).
G
- OR -
1. Lift the handset and dial 711.
 You hear the General Message.
 Normally, your MW LED goes out. If it continues to flash, you have unanswered
Message Waiting requests or new messages in your Voice Mail mailbox.

To record, listen to or erase the General Message:

1. Press Speaker or lift the handset.
- OR -
At single line telephone, lift the handset.
2. Dial 712.
to listen to the message you just recorded.
#
1353
to end recording.
#