Replacement Modules - GE N60 Instruction Manual

2.1 INTRODUCTION
c) ORDER CODES WITH PROCESS BUS MODULES
The order codes for units with the process bus module are shown below.
Table 2–4: N60 ORDER CODES (WITH PROCESS BUS)
N60 - * ** - *
BASE UNIT N60 | |
CPU E |
G |
H |
2
J |
SOFTWARE 00
03
(IEC 61850 options
06
not available with
07
type E CPUs)
14
15
16
17
MOUNT/COATING
FACEPLATE/ DISPLAY
POWER SUPPLY
PROCESS BUS MODULE
DIGITAL
INPUTS/OUTPUTS
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
Replacement modules can be ordered separately as shown below. When ordering a replacement CPU module or face-
plate, please provide the serial number of your existing unit.
Not all replacement modules may be applicable to the N60 relay. Only the modules specified in the order codes are
available as replacement modules.
NOTE
Replacement module codes are subject to change without notice. Refer to the GE Multilin ordering page at
http://www.gedigitalenergy.com/multilin/order.htm
NOTE
2-4
* * - F ** - H ** - M ** - P
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
H | | | | |
A | | | | |
C | | | |
D | | | |
A | | | |
P | | | |
G | | | |
B | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
H | | |
L | | |
| 81 |
XX XX XX
4L
67
6C
6D
6E
6F
6P
6R
6S
6T
6U
6V
N60 Network Stability and Synchrophasor Measurement System
** - U ** - W/X ** Full Size Horizontal Mount
| | | Base Unit
| | | RS485 and RS485
| | | RS485 and multi-mode ST 10Base-F
| | | RS485 and multi-mode ST redundant 10Base-F
| | | RS485 and multi-mode ST 100Base-FX
| | | No software options
| | | IEC 61850
| | | Phasor measurement unit (PMU)
| | | IEC 61850 and phasor measurement unit (PMU)
| | | Two phasor measurement units (PMUs); requires at least one CT/VT module
| | | IEC 61850 and two phasor measurement units (PMUs); requires at least one CT/VT module
| | | Four phasor measurement units (PMUs); requires at least two CT/VT modules
| | | IEC 61850 and four phasor measurement units (PMUs); requires at least two CT/VT modules
| | | Horizontal (19" rack)
| | | Horizontal (19" rack) with harsh environmental coating
| | | English display
| | | French display
| | | Chinese display
| | | English display with 4 small and 12 large programmable pushbuttons
| | | French display with 4 small and 12 large programmable pushbuttons
| | | Chinese display with 4 small and 12 large programmable pushbuttons
| | | Enhanced front panel with English display
| | | Enhanced front panel with French display
| | | Enhanced front panel with Russian display
| | | Enhanced front panel with Chinese display
| | | Enhanced front panel with English display and user-programmable pushbuttons
| | | Enhanced front panel with French display and user-programmable pushbuttons
| | | Enhanced front panel with Russian display and user-programmable pushbuttons
| | | Enhanced front panel with Chinese display and user-programmable pushbuttons
| | | 125 / 250 V AC/DC power supply
| | | 24 to 48 V (DC only) power supply
| | | Eight-port digital process bus module
XX XX No Module
4L | 14 Form-A (no monitoring) Latchable outputs
67 | 8 Form-A (no monitoring) outputs
6C | 8 Form-C outputs
6D | 16 digital inputs
6E | 4 Form-C outputs, 8 digital inputs
6F | 8 Fast Form-C outputs
6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs
6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
6T | 4 Form-A (no monitoring) outputs, 8 digital inputs
6U | 6 Form-A (no monitoring) outputs, 4 digital inputs
6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputs
2G 2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H 2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
73 73 1550 nm, single-mode, LASER, 2 Channel
77 77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7H 7H 820 nm, multi-mode, LED, 2 Channels
7I 7I 1300 nm, multi-mode, LED, 2 Channels
7M 7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
7S 7S G.703, 2 Channels
7V 7V RS422, 2 Channels, 2 Clock Inputs
7W 7W RS422, 2 Channels
for the latest details concerning N60 ordering options.
2 PRODUCT DESCRIPTION

2.1.3 REPLACEMENT MODULES

GE Multilin
http://