Transducer Inputs And Outputs - GE N60 Instruction Manual

6.3 METERING
The above actual values are displayed without the corresponding time stamp as they become available per the recording
rate setting. Also, the recording post-filtering setting is applied to these values.
6
PATH: ACTUAL VALUES
 DCMA INPUT xx

Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
6-22
PMU 1 V0:
MESSAGE
0.0000 kV, 0.00°
PMU 1 IA:
MESSAGE
0.0000 kA, 0.00°
PMU 1 IB:
MESSAGE
0.0000 kA, 0.00°
PMU 1 IC:
MESSAGE
0.0000 kA, 0.00°
PMU 1 IG:
MESSAGE
0.0000 kA, 0.00°
PMU 1 I1:
MESSAGE
0.0000 kA, 0.00°
PMU 1 I2:
MESSAGE
0.0000 kA, 0.00°
PMU 1 I0:
MESSAGE
0.0000 kA, 0.00°
PMU 1 FREQUENCY:
MESSAGE
0.0000 Hz
PMU 1 df/dt:
MESSAGE
0.0000 Hz/s
PMU 1 CONFIG CHANGE
MESSAGE
COUNTER: 0
 
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
 
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
N60 Network Stability and Synchrophasor Measurement System
6 ACTUAL VALUES
Range: Substituted with zero if delta-connected VTs.
Range: 0 to 65535

6.3.13 TRANSDUCER INPUTS AND OUTPUTS


DCMA INPUT xx

RTD INPUT xx
GE Multilin