Phasor Measurement Unit Records - GE N60 Instruction Manual

6.4 RECORDS
Refer to the
COMMANDS
PATH: ACTUAL VALUES
 PMU
 RECORDS
The number of triggers applicable to all the phasor measurement unit recorders is indicated by the
value. The status for each of the six phasor measurement unit recorders is indicated as follows:
PATH: ACTUAL VALUES
 PMU 1
 RECORDING
6
PATH: ACTUAL VALUES
 BREAKER 1

There is an identical menu for each of the breakers. The

COMMANDS CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
6-24
 menu for clearing data logger records.
CLEAR RECORDS
 
RECORDS PMU RECORDS
NUMBER OF TRIGGERS:
0
 PMU 1
MESSAGE
 RECORDING
 PMU 2
MESSAGE
 RECORDING
 PMU 6
MESSAGE
 RECORDING
 
RECORDS PMU RECORDS
PMU 1 FORCE TRIGGER:
Yes
PUM 1 AVAILABLE
MESSAGE
RECORDS: 0
PUM 1 SECONDS
MESSAGE
PER RECORD: 0.0
PUM 1 LAST CLEARED:
MESSAGE
2005/07/14 015:40:16
 
RECORDS MAINTENANCE
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
MESSAGE
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
MESSAGE
0.00 kA2-cyc
BKR 1 OPERATING TIME
MESSAGE
φA:
BKR 1 OPERATING TIME
MESSAGE
φB:
BKR 1 OPERATING TIME
MESSAGE
φC:
BKR 1 OPERATING
MESSAGE
TIME:
menu for clearing breaker arcing current records. The
N60 Network Stability and Synchrophasor Measurement System

6.4.4 PHASOR MEASUREMENT UNIT RECORDS

Range: 0 to 65535 in steps of 1
See below.
See below.
↓
See below.

PMU 1(6) RECORDING
Range: No, Yes
Range: 0 to 65535 in steps of 1
Range: 0 to 6553.5 in steps of 0.1
Range: date and time in format shown

BREAKER 1
0 ms
0 ms
0 ms
0 ms
values are in units of kA
BKR 1 ARCING AMP
6 ACTUAL VALUES
NUMBER OF TRIGGERS
6.4.5 BREAKER MAINTENANCE
2
-cycles. Refer to the
BREAKER OPERATING TIME
GE Multilin
is