GE N60 Instruction Manual page 321
Network stability and
synchrophasor measurement system
ur series
Hide thumbs
Also See for N60:
- Instruction manual (666 pages) ,
- Communications manual (532 pages) ,
- Instruction manual (602 pages)
Table of Contents
Advertisement
5 SETTINGS
5.10 TESTING
During the PMU test mode, the physical channels (VA, VB, VC, VX, IA, IB, IC, and IG), frequency, and rate of change of fre-
quency are substituted with user values, while the symmetrical components are calculated from the physical channels. The
test values are not explicitly marked in the outgoing data frames. When required, it is recommended to use the user-pro-
grammable digital channels to signal the C37.118 client that test values are being sent in place of the real measurements.
5
GE Multilin
N60 Network Stability and Synchrophasor Measurement System
5-203
Advertisement
Table of Contents
