Cautions And Warnings - GE N60 Instruction Manual

1 GETTING STARTED
1 GETTING STARTED 1.1IMPORTANT PROCEDURES
Please read this chapter to help guide you through the initial setup of your new relay.
Before attempting to install or use the device, review all safety indicators in this document to help prevent injury, equipment
damage, or downtime.
The following safety and equipment symbols are used in this document.
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury.
Indicates practices not related to personal injury.
1. Open the relay packaging and inspect the unit for physical damage.
2. View the rear nameplate and verify that the correct model has been ordered.
N60
Network Stability and Security Relay
Technical Support:
Tel: (905) 294-6222
Fax: (905) 201-2098
3. Ensure that the following items are included:
• Instruction manual (if ordered)
• GE EnerVista CD (includes the EnerVista UR Setup software and manuals in PDF format)
• Mounting screws
For product information, instruction manual updates, and the latest software updates, please visit the GE Digital Energy
website.
If there is any noticeable physical damage, or any of the contents listed are missing, please contact GE
Multilin immediately.
NOTE
GE MULTILIN CONTACT INFORMATION AND CALL CENTER FOR PRODUCT SUPPORT:
GE Digital Energy
650 Markland Street
Markham, Ontario
Canada L6C 0M1
TELEPHONE: Worldwide +1 905 927 7070
Europe/Middle East/Africa +34 94 485 88 54
North America toll-free 1 800 547 8629
FAX: +1 905 927 5098
E-MAIL: Worldwide multilin.tech@ge.com
Europe multilin.tech.euro@ge.com
HOME PAGE: http://www.gedigitalenergy.com/multilin
GE Multilin N60 Network Stability and Synchrophasor Measurement System
RATINGS:
Control Power:
Contact Inputs:
Contact Outputs:
GE Multilin
http://www.GEmultilin.com
Figure 1–1: REAR NAMEPLATE (EXAMPLE)
1.1 IMPORTANT PROCEDURES

1.1.1 CAUTIONS AND WARNINGS

88-300V DC @ 35W / 77-265V AC @ 35V A
300V DC Max 10mA
Standard Pilot Duty / 250V AC 7.5A
360V A Resistive / 125V DC Break
4A @ L/R = 40mS / 300W
Made in
®
Canada
®
1.1.2 INSPECTION CHECKLIST
Model: N60E00HCHF8AH6AM6BP8BX7A
Mods: 000
847702A3
Wiring Diagram:
Inst. Manual: GEK-113278
Serial Number: MAZB98000029
D
Firmware:
Mfg. Date: 2005/03/20
- M A A B 9 7 0 0 0 0 9 9 -
847711A1.CDR
1
1-1